Nilam Flute Machine
SPECIFICATIONS:
Flute Type: Steam System
Tank Material: Stainless Steel (Maspion 430)
Tank Height: 250cm
Tank Diameter: 150cm
Tank Thickness: 2mm
Capacity: 200-250kg (dry patchouli leaves chopped depending on size)
Pipe Pindingin: Alminium Materials
Oil separator: Plastic Materials (3 levels)
Flue: Raw Iron (drums)
1. top of the tank lid stainless steel 2mm thick binder bolts
2. destilat expenditures pipe and aluminum pipe cooler, 2in diameter; 1.5 in long and 1in total 54M
3. Sarangan refuted elbow 3x3cm
4. pipe controls the maximum water level and is equipped with a waste steam valve
5. tap pipe diameter of 1.5 iron in equipped with a valve
6. 3 units of fire pipe ss material 2mm thick 15 cm in diameter.
7. revenue water pipe valve equipped with a 1.5in diameter metal materials
8. pipe minimum water level control of iron materials, the diameter of ¾ in length 3m
Note:
1. consisting of cooling pond 2 ponds, 4x3m and 4x1, 5m water depth of 1m to the assumptions in 1hari 3x cook (Pool dependents buyer)
2. wood fuel or coal
3. combustion kitchen red rock partners with the combustion of ground or a railway car (dependent purchasers) kitchen pictures will be given.
4. shipping cost not included.
5. distillation process lasted 4 hours not including loading and unloading materials.
6. the oil 2-2,5% range depending on the quality of raw materials and how to drying.
Operation tools:
1. No. 4 pipe valve is opened, the contents of the tank with water by opening the valve pipe No. 7, until the height of the water out of the control pipe no 4. closed pipe valve valve pipe 7 and No. 4.
2. enter patchouli leaves that have been chopped into a tank of distilled with uneven density.
3. tank with a tight lid using bolts that are available. Tightening bolts must be balanced crossed.
4. turn on the ignition with a flame masimal stable.
5. within 30 minutes destilat already out through the pipe 2 and no destilat accommodated in the oil and water separator
6. between 1.5-2 hours of water in the tank must be marked with the sound added to the control pipe No. 8
7. for additional water content, reduce the heat a minimum, open 4 valve pipes no rest until they run out of steam out, open valve No. 7 pipes fill up spilling water on the pipe no 4. closed valve pipe no 4 and no 7. Ignition was raised again.
8. after 2 hours (total 4jam) pipeline control signal No. 8 reads the distillation process has been completed.
9. destilat output observed at the end of the pipe cooling cheek No. 2, if there is no exit destilat, then close the top of the tank can be opened distilled to remove leaves that have been distilled patchouli.
10. patchouli oil in the oil separator tank can be taken is situated at the top.
Price:
Ø capacity patchouli leaf size of 200-250kg and 240cm tall tank 150cm diameter stainless steel cooling pond Price U.S. $ 60 million.
Ø patchouli leaf capacity 100-125kg tank size 210cm tall and 115cm material stailess diameter steel cooling pond Price U.S. $ 40 millions.
Ø nego the price depending on the agreement
Ø Surabaya franco prices and not including taxes.
Preparation time: normally between 1 to 1.5 months depending on the agreement
Contact :
Faizal Reza
Telp : 083813841520, 085735872230
Office : 0318554394
email : aku.reza15@yahoo.com